View ZX62D-B-5P8_6169683.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1 new 2008.7 micro-usb connectors meeting requirements of usb 2.0 standard zx series overview extremely small high reliability connectors complying with physical, electrical and environmental requirements of micro-usb standard (usb 2.0). receptacles and plugs are available in a wide variety of mounting and termination configurations, permitting their use in various applications. features 1. size reduction compared with the standard mini-b connectors, the size of zx connectors is reduced by approximately 60% while still allowing a high-speed data transfer of 480 mbps, specified in usb 2.0. 2. receptacle styles two interface configurations: micro-b and micro-ab in standard, mid-mount and reverse mounting styles. smt and through-hole (shell) pc board terminations 3. plug styles corresponding to the receptacle styles, two interface configurations: micro-b and micro-a, with direct wire or pcb wire soldering. several plug styles can be used for data transmission, earphone or charging applications. 4. high durability unique contact and lock configuration assures high durability while maintaining easy insertion / disconnection. fully mated condition (when mated with corresponding hrs connector) is confirmed by a definite tactile sensation 5. rohs compliant all components and materials comply with the requirements of eu directive 20/95/ec applications mobile phones, pda, portable music players, digital cameras, digital camcorders and other applications requiring high reliability micro-b interface connectors. reverse ( top mount ) drop-in ( mid-mount ) standard ( bottom mount ) usb 2.0 hi-speed (480 mbps) eye pattern measurement results: measured with usb 2.0 cable 2.4 m long 500ps/div 200 mv/div tp2 note: contact us to ascertain whether a tid number has been acquired for an individual product. the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
2 zx series micro-usb connectors meeting requirements of usb 2.0 standard 1. contact resistance 30 m? max. 100 ma 2. withstanding voltage no flashover or insulation breakdown 100 v ac / 1 minute 3. capacitance 2 pf max. between adjacent contacts at 1,000 hz (ac voltage) 4. durability contact resistance: rise from initial value of 10 m? max. 10,000 cycles 5. total insertion/removal force insertion force: 35 n max., removal force: 8 n min. mated with corresponding connector item conditions specification specifications ratings 1 a (per contact) or 1.8 a (contacts no. 1 and 5) and 0.5 a (contacts no. 2, 3, and 4) current rating voltage rating operating temperature range storage temperature range 30 v ac -30? to +85 ? -30 ? to +85? materials receptacles plugs note 1: classifiers such as a, b, and c are entered for *. ordering information zx 62 rd - b - 5 p * * 8 1 2 4 5 3 6 7 8 zx 40 - b - 5 s * * - unit 1 2 zx 40 - b - slda receptacles plugs product styles table 4 5 6 7 9 4 9 1 2 series name zx termination style 10's: right-angle pcb wire, smt 20's: straight, pcb wire 40's: direct wire 60's: right-angle, pcb wire 80's: cradle smt board mounting style blank standard (bottom mount) (receptacles) d standard (bottom mount) through hole r reverse (top mount) rd reverse (top mount) through hole m drop-in (mid-mount) mating side configuration a micro-a b micro-b ab micro-ab number of contacts 5 contact type p receptacle- male s plug C female serial no. shell termination style C blank smt receptacles 8 through hole (solder tab length: 0.8mm) components-plugs unit assembly (insulator/contact/lock) sld* cover (note 1) 1 2 3 4 5 6 8 7 9 micro-a micro-b micro-ab interface receptacle plug part insulator lcp micro-b: black, micro-ab: gray ul94v-0 contacts copper alloy selective gold plated --------------- shell stainless steel tin alloy plating --------------- material finish remarks part insulator synthetic resin micro-a: white, micro-b: black ul94v-0 contacts copper alloy selective gold plated --------------- lock spring stainless steel --------------- --------------- shell stainless steel nickel plated or unfinished --------------- material finish remarks the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
zx62-b-5pa pcb wire soldering (smt) assembly (insulator/contacts/lock) :zx64-b-5s-unit(14) cover-top :zx64-b-slda cover- bottom :zx64-sldb charging pcb wire soldering (smt) assembly (insulator/contacts/lock) :zx64-b-5s-unit(14) cover :zx64-b-sldc charging earphone direct wire soldering data assembly (insulator/contacts/lock) :zx40-a-5s-unit cover-top :zx40-a-slda cover- bottom :zx40-sldb 14 and 15 14 and 16 17 and 18 3 zx series micro-usb connectors meeting requirements of usb 2.0 standard mating side configuration application mounting, termination styles/wire attachment configurations note: 1. part numbers in the plugs section of the above table list the assembly (insulator/contacts/locks) and the correspondin g shields/covers. note: 2. optional printed circuit boards for the plugs are shown for reference only. not supplied with applicable connectors. note: 3. the color of the insulators body in the assembly (insulator/contacts/lock) shown in the 3d image column above is blue for clarity. refer to the materials (page 2) for correct colors. micro-b receptacles micro-ab standard smt plugs micro-b part number 3d image page 4 smt + dip ZX62D-B-5P8 4 smt reverse zx62r-b-5p 5 smt drop-in zx62m-b-5p 5 smt standard zx62-ab-5pa 6 smt + dip smt smt + dip reverse zx62d-ab-5p8 zx62r-ab-5p zx62rd-ab-5p8 6 7 7 direct wire soldering data assembly (insulator/contacts/lock) :zx40-b-5s-unit(12) cover-top :zx40-b-slda cover-bottom :zx40-sldb 9 and 10 pcb wire soldering (right angle, through hole) assembly (insulator/contacts/lock) :zx10-b-5s-unit(12) cover-top :zx10-b-slda cover-bottom :zx10-sldb(3.3) 11 and 12 pcb wire soldering (straight, through hole) earphone assembly (insulator/contacts/lock) :zx20-b-5s-unit(12) cover :zx20-b-sldc 13 cradles micro-b micro-a smt + dip cradle zx80-b-5s 19 with lock zx80-b-5sa 19 without lock the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
4 zx series micro-usb connectors meeting requirements of usb 2.0 standard receptacles micro b - standard (bottom mount), shell smt part number cl no. packaging rohs zx62-b-5pa 242-0033-8 2,000 pieces per reel yes no.5 7.9 2.15 7.5 2.5 0.6 5 2.8 no.1 pcb edge no conductive traces 0.5 4.3 6.2 9.8 1.6 no.5 1.45 3.35 1.9 1.35 0.4 1.3 2.6 4.1 8.3 no.1 b recommended pcb mounting pattern micro b - standard (bottom mount), shell through hole part number cl no. packaging rohs ZX62D-B-5P8 242-0034-0 2,000 pieces per reel yes all dimensions: mm 4.85 2.6 0.65 1.25(land) 2.9 0.85(th) 0.2 no conductive traces r0.325(th) r0.325(th) 0.5 1.3 1.9 2.75 3.35 1.5(th) 4.1 5.2 7.2 9.4 pcb edge 0.5(th) r0.3(th) 0.1 r0.525(land) 1.05(land) 0.4 0.65(th) 1.35 no.5 r0.5(land) no.1 no.1 no.5 7.2 2.5 0.8 7.5 4.85 0.6 5 2.8 2.15 2.9 b recommended pcb mounting pattern all dimensions: mm the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
5 zx series micro-usb connectors meeting requirements of usb 2.0 standard pcb edge no.1 no.5 0.4 r0.4 3.6 2.4 4.3 6.9 2.6 1.3 7.8 12 8.8 1.9 7.15 5.15 2.4 1.4 1.05 1.5 4.7 2 c0.3 no.5 no.1 4.8 4.7 0.25 1.3 2.6 7.5 11.5 7.5 0.6 1.25 1.23 2.74 4.3 5 5.3 1.9 b recommended pcb mounting pattern no.5 no conductive traces 1.35 2 1.3 4.1 8.3 1.9 2.9 0.43 3.35 no.1 1.45 2.6 0.4 5.6 9.8 3.9 6.6 0.5 no.5 no.1 7.5 8.8 2.5 2.15 0.6 5 b recommended pcb mounting pattern part number cl no. packaging rohs zx62r-b-5p 242-0028-8 2,000 pieces per reel yes receptacles micro b - reverse (top mount) shell smt part number cl no. packaging rohs zx62m-b-5p 242-0024-7 2,000 pieces per reel yes micro b - drop-in (mid-mount), shell smt all dimensions: mm all dimensions: mm the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
6 zx series micro-usb connectors meeting requirements of usb 2.0 standard no.1 no.5 0.5 1.3 1.9 1.45 3.35 1.35 2.6 0.4 6.2 9.8 4.3 1.6 8.3 4.1 pcb edge 8.8 no.5 no.1 7.5 2.5 2.8 2.15 5 0.6 no conductive traces b recommended pcb mounting pattern receptacles micro ab - standard (bottom mount), shell smt part number cl no. packaging rohs zx62-ab-5pa 242-0045-7 2,000 pieces per reel yes 0.6 8.35 7.5 2.5 no.5 no.1 4.45 0.6 2.025 3.125 5 2.8 1.3 1.7 1.5 0.65(th) 1.05(land) r0.45(land) r0.25(th) 0.4 2.6 4.45 1.35 1.9 3.475 2.625 4.1 5.2 0.5 0.325 9.4 0.5 1.5(th) r0.3(th) r0.5(land) 7.35(th) 9(th) 1.3 0.85(th) 1.25(land) 3.125 no.5 no.1 pcb edge no conductive traces b recommended pcb mounting pattern micro ab - standard (bottom mount), shell through hole part number cl no. packaging rohs zx62d-ab-5p8 242-0027-5 2,000 pieces per reel yes all dimensions: mm all dimensions: mm the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
7 zx series micro-usb connectors meeting requirements of usb 2.0 standard 2.9 4-r0.4 4.1 8.3 4.75 0.85 0.43 1.45 2.6 1.3 1.35 0.4 0.5 1.6 9.8 6.6 3.35 1.9 no conductive traces no.5 no.1 pcb edge 7.5 2.5 no.5 no.1 8.8 5 0.6 2.15 b recommended pcb mounting pattern receptacles micro ab - reverse (top mount), shell smt part number cl no. packaging rohs zx62r-ab-5p 242-0035-3 2,000 pieces per reel yes all dimensions: mm 0.6 pcb edge no conductive traces 9.4 no.5 r0.25(th) no.1 9(th) 7.35(th) 6.6 4.45 2.6 1.3 0.4 1.05(land) r0.2max r0.45(land) 0.65(th) 1.35 1.5 1.7 3.475 r0.5(land) 2.625 1.9 1.5(th) 1.3 0.85 2.9 4.75 (0.5) (0.325) r0.3(th) 3.125 0.555 1.25(land) 0.85(th) 8.35 2.5 7.5 no.1 no.5 4.45 5 0.6 2.025 3.125 b recommended pcb mounting pattern micro ab - reverse (top mount), shell through hole part number cl no. packaging rohs zx62rd-ab-5p8 242-0025-0 2,000 pieces per reel yes all dimensions: mm the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
8 zx series micro-usb connectors meeting requirements of usb 2.0 standard plugs ?assembled (not-terminated, without overmold) components zx40-sldb zx40- * -slda cover-top zx40- * -5s-unit assembly (insulator/contacts/lock) *no pcb required cover-bottom cover-top cover-bottom zx10-sldb assembly (insulator/contacts/lock) *smt pcb termination zx10-b-5s-unit zx10-b-slda zx10 - pcb wire soldering cover zx20- * -sldc assembly (insulator/contacts/lock) *straight through hole pcb termination zx20- * -5s-unit zx20 - pcb wire soldering cover-bottom zx64-sldb cover-top assembly (insulator/contacts/lock) *right angle through hole pcb termination zx64- * -5s-unit zx64- * -slda zx64 - pcb wire soldering zx40 - direct wire soldering the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
9 zx series micro-usb connectors meeting requirements of usb 2.0 standard micro b - component, cover-top - direct wire soldering part number cl no. packaging rohs zx40-b-slda 242-0003-7 4,000 pieces per reel yes 22.6 1.8 8 6.85 contact hrs for cable termination procedure manual. plugs micro b - assembly (insulator/contacts/lock) ?direct wire soldering part number cl no. rohs zx40-b-5s-unit(12) 242-0002-4-12 yes 14.1 7.9 no.1 no.5 4.2 all dimensions: mm all dimensions: mm the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
10 zx series micro-usb connectors meeting requirements of usb 2.0 standard plugs micro a, micro b - component, cover-bottom - direct wire soldering part number cl no. packaging cable dia. rohs zx40-sldb 242-0004-0 4,000 pieces per reel ?3.8 yes zx40-sldb(3.3) 242-0023-4 ?3.3 16.2 8 16.2 8 zx40-sldb zx40-sldb ( 3.3 ) all dimensions: mm 22.6 6.85 8.6 4.75 1.8 assembled all dimensions: mm the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
11 zx series micro-usb connectors meeting requirements of usb 2.0 standard all dimensions: mm contact hrs for cable termination procedure manual. plugs micro b - assembly (insulator/contacts/lock) - right angle through hole pcb wire soldering (non-direct) micro b - component, cover-top - right angle through hole a-a a a no.5 0.79 4 no.1 0.15 1.3 2.6 12.05 1 x 0.3 1.25 0.95 0.45 7.6 23.4 6.85 7.7 1.8 part number zx10-b-slda cl no. packaging rohs 242-0031-2 4,500 pieces per reel yes part number zx10-b-5s-unit(12) cl no. packaging rohs 242-0030-0-12 1,500 pieces per reel yes all dimensions: mm pcb mounting pattern *pcb required (not supplied) max. thickness: 0.6mm no.5 no.1 x 0.15 1.3 2.6 3.05 3.35 0.95 1.55 0.45 0.95 1.25 5-?0.9(land) 5 5-?0.5(th) 7.3 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
12 zx series micro-usb connectors meeting requirements of usb 2.0 standard 16.95 7.7 plugs micro b - component, cover-bottom ?right angle through hole 23.4 8.1 6.85 4.4 1.8 assembled part number zx10-sldb(3.3) cl no. packaging rohs 242-0032-5 4,500 pieces per reel yes all dimensions: mm all dimensions: mm the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
13 zx series micro-usb connectors meeting requirements of usb 2.0 standard all dimensions: mm plugs micro b - assembly (insulator/contacts/lock) - straight through hole pcb wire soldering (non-direct) contact hrs for cable termination procedure manual. part number cl no. rohs zx20-b-5s-unit(12) 242-0012-8-12 yes all dimensions: mm 1.3 2.6 5-0.15 1 1.4 12.2 1.55 0.35 7.9 no.1 no.5 3.975 4.2 1.3 2.6 8.2 1.2(through hole) 0.6(through hole) 1.55 10.25 5-?0.7(through hole) 5-?1.1(land) r0.3(through hole) 1(land) 1.6(land) r0.5(land) no.1 no.5 pcb mounting pattern *pcb required (not supplied) max. thickness: 0.6mm micro b - component, cover - straight, through hole part number cl no. packaging rohs zx20-b-sldc 242-0022-1 4,000 pieces per reel yes 1.1 8.2 2-0.2 0.6 8 6.85 1.8 12.1 4.4 8.4 2-0.2 8.2 2.6 1.3 12.2 1.55 1.8 0.35 0.6 1 1.4 6.85 5-0.15 assembly (insulator/contacts/lock) cover assembled the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
14 zx series micro-usb connectors meeting requirements of usb 2.0 standard micro b - component, cover-top ?right angle smt part number cl no. packaging rohs zx64-b-slda 242-0013-0 4,000 pieces per reel yes 24.7 6.85 8 1.8 all dimensions: mm 16.1 1.3 2.6 5-0.15 3.7 7.9 no.1 no.5 plugs micro b - assembly (insulator/contacts/lock) - right angle smt contact hrs for cable termination procedure manual. part number cl no. rohs zx64-b-5s-unit(14) 242-0009-0-14 yes all dimensions: mm no.1 no.5 1.3 2.6 6.8 0.5 1.1 1.5 6 0.35 pcb mounting pattern *pcb required (not supplied) max. thickness: 1.0mm the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
15 zx series micro-usb connectors meeting requirements of usb 2.0 standard 24.7 4.1 8.4 6.85 1.8 assembly (insulator/contacts/lock) cover-top cover-bottom assembled plugs micro b - component, cover-bottom - right angle smt part number cl no. packaging rohs zx64-sldb 242-0049-8 4,000 pieces per reel yes 18.25 8 all dimensions: mm all dimensions: mm the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
16 zx series micro-usb connectors meeting requirements of usb 2.0 standard 16.1 6.85 8.4 4.1 1.8 assembly (insulator/contacts/lock) cover-top cover-bottom assembled all dimensions: mm 6.85 8 1.8 16.1 plugs micro b - component, shell/cover ?right angle smt part number cl no. packaging rohs zx64-b-sldc 242-0018-4 4,000 pieces per reel yes shell/cover, without cable clamp this shell/cover does not require zx64-sldb. the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
17 zx series micro-usb connectors meeting requirements of usb 2.0 standard part number cl no. packaging rohs zx40-a-slda 242-0011-5 4,000 pieces per reel yes 22.6 8 1.8 6.85 micro a - component, cover-top - direct wire soldering all dimensions: mm contact hrs for cable termination procedure manual. part number cl no. rohs zx40-a-5s-unit 242-0010-2 yes plugs micro a - assembly (insulator/contacts/lock) - direct wire soldering 12.4 7.9 4.2 no.1 no.5 contacts insulator body (color grey) all dimensions: mm the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
18 zx series micro-usb connectors meeting requirements of usb 2.0 standard 4.75 22.6 6.85 8.6 1.8 assembly (insulator/contacts/lock) cover-top cover-bottom assembled part number cl no. packaging cable dia. rohs zx40-sldb 242-0004-0 4,000 pieces per reel ?3.8 yes zx40-sldb(3.3) 242-0023-4 ?3.3 plugs micro a, micro b - component, cover-bottom - direct wire soldering 16.2 8 16.2 8 zx40-sldb zx40-sldb(3.3) all dimensions: mm all dimensions: mm the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
19 zx series micro-usb connectors meeting requirements of usb 2.0 standard 8-r0.25 contact no.5 contact no.1 2-?2.2(hole) 16.55 0.37 8-r0.55 3.15 1.3(through hole) 1.9(land) 1.1(land) 0.5(through hole) 1.86 1.3 2.6 6.65 1.6(through hole) 0.5(through hole) 0.4 2.9 2.2 1.1(land) 2.2(land) micro b, without lock part number cl no. packaging rohs zx80-b-5sa 242-0019-7 100 pieces yes 6.85 no.5 no.1 2-0.2 6.65 1.3 2.6 5-0.15 1.88 2.78 2.42 0.37 2.32 3.52 16.55 20.55 2.5 7.1 13 1.15 1.86 3.15 0.7 1 r1.6 8.55 b pcb mounting pattern plug-vertical, cradle mount, shell through hole micro b, with lock 6.85 no.1 no.5 2-0.2 6.65 1.3 2.6 5-0.15 1.88 2.78 2.42 0.37 2.32 3.52 16.55 20.55 2.5 7.1 13 1.15 1.86 3.15 0.7 1 r1.6 8.55 part number cl no. packaging rohs zx80-b-5s 242-0017-1 100 pieces yes all dimensions: mm all dimensions: mm the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
20 zx series micro-usb connectors meeting requirements of usb 2.0 standard b precautions 1. exercise care when handling the connectors. do not subject them to excessive external forces when mating/un-mating. 2. mate and un-mate as intended, holding by the overmolded body, in the correct direction. do not un-mate by pulling on the cab le. 3. some tooling marks may be visible on the surfaces of receptacle (shell/cover). no form/fit or function is affected. 4. appearance of the surface finishes on the receptacles may vary between production runs. no affect on form, fit or function. b recommended temperature profile - receptacles using lead-free solder paste 150? (s) 180? 120 s (?) 250 250? 220?min. 70 s 200 150 100 50 hrs test condition solder composition :paste,96.5%sn/3.0%ag/0.5%cu test board :glass epoxy 35mm35mm0.8mm thick the temperature profile is based on the left conditions. in individual applications the actual temperature may vary, depending on solder paste type, volume/thickness and board size/thickness. contact your solder paste and equipment manufacturer for specific recommendations. note 1: up to 2 cycles of reflow soldering are possible under the same conditions, provided that there is a return to normal temperature between the first and second cycle. note 2: the temperature profile indicates the board surface temperature at the point of contacts with the connector terminals. 5-23,osaki 5-chome,shinagawa-ku,tokyo 141-8587,japan phone: 81-3-3491-9741, fax: 81-3-3493-2933 http://www.hirose.com http://www.hirose-connectors.com b packaging specifications 12 a b 1.75 2 4 0.5 1.8 ?1.5 unreeling direction embossed carrier tape dimensions reel dimensions d ? 13 ? 380 c unreeling direction part number a dimension b dimension zx62-b-5pa 24 11.5 zx62-ab-5pa 24 11.5 zx62m-b-5p 24 11.5 other 16 7.5 part number c dimension d dimension note : tape and reel packaging (2,000 pieces/reel). order by number of reels. zx62-b-5pa 30.4 24.4 zx62-ab-5pa 30.4 24.4 zx62m-b-5p 30.4 24.4 other 22.4 16.4 the contents of this catalog are current as of date of 07/2008. contents are subject to change without notice for the purpose o f improvements. the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.

▲Up To Search▲

Price & Availability of ZX62D-B-5P8

	To Download ZX62D-B-5P8 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .